Shanghai Siway Curtain Material Co., Ltd always supply the best products, best service and best reputation, and we are willing to be your most trusted long-term partner.
|Place of Origin:||China|
|Minimum Order Quantity:||500-1000pcs|
|Delivery Time:||5-8 work days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union|
|Supply Ability:||100000pcs per year|
|Product Name:||Polyurethane Sealant||Main Raw Material:||Polyurethane|
polyurethane construction sealant,
automotive polyurethane sealant
Polyurethane(PU) Sealant Polyurethane Adhesive Sealant for car glass and Windshield Glazing
SV312 PU Sealant is one-component polyurethane product formulated by Siway Building Material Co.,LTD. It reacts with moisture in the air to form a kind of elastomer with high strength, aging, vibration, low and corrosive resistance properties. PU Sealant was widely used to join the front, back and side glass of the cars and also can keep a steady balance between the glass and the paint on the bottom. Normally we need to use a sealant guns to press out when it shaped in a line or in bead.
|SAGGING PROPERTISE (MM)||0|
|TENSILE STRENGTH ( MPA)||≥4.0|
|ELONGATION AT BREAK (%)||≥350|
|VOLATILE CONTENT (%)||≤4|
|TENSILE-SHARE STRENGTH (MPA)||≥1.5|
|TOUCH DRY TIME (MIN)||10～30|
|CURING SPEED (MM/24H)||3～5|
|APPLICATION TEMPERATURE (ºC)||+5～+35|
|SHELF LIFE (MONTHS)||9|
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
Minimum application temperature: 5°C.
SV312 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply P303 in a continuous bead using enough pressure to properly apply the sealant.
If you want the TDS or MSDS or other details, please contact with our sales person.
Contact Person: Summer